1915 Picnic Dress, Part II: Bodice

I had originally planned on making this a two-piece dress with a separate blouse and skirt, but then realized that my fabric was so sheer that it would clearly show the tucked-in blouse through the skirt, making the whole thing look weird. I decided instead to turn it into a dress and add a closure to the side front. The layered design of the skirt would help with this, since it would disguise the closure once it went past the bodice.

I started with Truly Victorian’s TVE45, the 1911 Narrow Panel Blouse, cutting out a mockup just to see how it would fit. To my surprise, it did not go well.

The pattern is so basic– two T-shaped side panels connected by a front and back– that I’d assumed it would go together easily and without much trouble. Well, it went together easily, but the fit was all off. The front panel was far too low on the chest, and the kimono sleeves pulled the already slightly-angled neckline even more towards the sides of the shoulders, causing unsightly pulling across the bust and skewing the neck opening. The sleeves were also too baggy, which is probably a matter of preferences vs. a flaw in the pattern, but which still had to be adjusted.

I endeavored to fix things first by altering the shape of the front and back panels to be wider and less angled. I like the angled look in general, but here it was not only causing the above-mentioned fit issues, but also reducing the amount of visible space available for my lace bodice insert, which I’d intended to show off. Making the panels wider gave me more space, and making the sides straighter kept the neckline stable. I also raised both panels up several inches– the front for modesty’s sake and the back to keep the neckline where it belonged.

1915 Picnic Dress, Part I: Fabric and Sketch

So this is my third year organizing a Historical Costumers’ Picnic, and in honor of the event I’m going to make something new to wear (as I do every year). Since I’ve got a bunch of other projects going on for Costume College I decided that this one should be relatively simple– no complicated fitting issues, no elaborate handmade trims or fastenings, no insane underpinnings. So the Victorian era was out, of course, as was the very early Edwardian period. I already had a 1920s summer dress from last year, so this time I opted to go a few years earlier, when the dresses were starting to get lighter, airier, and shorter (just hitting the ankle) but still had natural waistlines and relatively slim skirts. 1915 seemed about right from the fashion plates and extant gowns:

 

So here’s my sketch:

1882 Tea Gown, Part I: Fabric and Sketch

I can’t remember where I got the idea, but I’ve been wanting a Victorian tea gown for a while now. What’s a tea gown? It started off as a casual morning wrapper to be worn for informal at-home occasions, and then apparently got more stylized and formalized over time until it became a whole new mode of dress– still for wearing at home, but no longer something it was unacceptable to be seen in by visitors. Jennifer Rosbrugh has a nice history of them here, and The Dreamstress has another excellent explanation here.

Anyway, I loved the concept, and after a little bit more research I decided to base my own tea gown on Truly Victorian 432. It looks relatively straightforward, and has Watteau pleats in the back (shades of a robe a la francaise!) that I love the look of.

While I was in Los Angeles last year I saw some gorgeous embroidered fabric for $2.95/yard (!) that I just had to snap up– at the time I’d had a vague notion of making this project but wasn’t sure what exactly I wanted to do with it, so I got 8 yards of embroidered fabric, plus another two yards of coordinating sea-green dupioni and an extra yard of pinky-bronze taffeta to match the embroidered flowers. Plus several yards of coordinating trim, because it was on massive sale  at $0.99/yard! I figured that would be enough for anything.  Behold, my collection!

I’m fairly sure it’s all polyester/acetate, but it’s so darned beautiful and I’ll line it with cotton, at least, so that’s something, right?

1840s Day Dress, Part VI: Finishing Touches

After I finished the main dress, I decided to add some decorative touches in the form of an antique lace collar and cuffs. I bought mine as a set on eBay, and while they may not be strictly period-accurate– I think the set is probably from several decades after the 1840s, at the earliest– they’re lovely and work well with the dress.

One issue I had was that the lace was extremely yellowed from age– I knew I’d have to whiten it somehow. Soaking in a baking soda solution did nothing, as did Woolite, so I brought out the big guns and soaked it for an hour in an OxiClean bath. That did the trick! A quick press with a warm iron and it was ready to use.

Red Bustle Ballgown

I’ve already mentioned my propensity towards urging my friends to attend historical costume events with me, so it should be no surprise that for an upcoming Victorian ball I managed to convince a friend to let me outfit her in something appropriate– in this case, an altered modern ballgown (of course).

1910 Afternoon Dress, Part V: Guimpe

Don’t you think “guimpe” is a weird word? It’s a French term that got adopted into English, and it can refer to anything from a full underblouse to a dickey-type thing that just fills in the neckline, like a chemisette.

Anyway, my guimpe is made of a combination of ivory embroidered net and strips of ivory embroidered lace trim. I had to do some serious maneuvering to eke out my pattern pieces from the materials I had– take a look at the tiny scraps I had left of the net once I was done cutting! Nothing wider than 3″!

1910 Afternoon Dress, Part IV: Underskirt

Since I was making this outfit as separates, I decided to really maximize the sizing and mix-and-match potential by making the lace underskirt a separate piece as well– two skirts total. This way I can use the underskirt for another outfit somewhere down the road.

I started with a base skirt made of thin ivory cotton, which I based on the original pattern’s underskirt– I just cut it a bit larger in the back and added some small knife pleats to take up the extra fabric at the waist (for ease of size adjustment). I also evened out the waist height to hit at the natural waist in back rather than the artificially raised level of the original, and added a flat waistband. I omitted the hem facings from the pattern because this is an underskirt that’s going to be covered in lace– no one will see a machine-stitched small hem. I hemmed it to fall right at the ankle, figuring that I’d want the lace to fall slightly below that level.

1910 Afternoon Dress, Part II: Lace and Fabric

This is the lace that started it all. Really, I had a totally different idea for my next afternoon-tea outfit– it was going to be a tiered white cotton Edwardian dress with embroidered navy trim– and then I saw this lace on Etsy and immediately knew I wanted to go in another direction.

Anyway, the Etsy seller also had a coordinating narrower lace, plus an even narrower one that looked like it was somewhat similar, so I bought some of all three. I’ll use the widest stuff sparingly, since it’s the most expensive– mostly for the lace collar and the decoration across the front of the bodice. The medium width will be used on the dress cuffs and also on the collar, and I’ll use the narrowest stuff to trim the cuffs of the undersleeves.

My Fair Lady Ballgown, Part XI: More Appliqués

I know, you’re probably curious to know what happened with the sequins, but you’ll need to wait until later because I had to get the center panel’s appliqués done first. The larger floral appliqués I ordered were some of the last components to arrive, which is why I had to leave it for so long. I bought both venise and alencon lace appliqués because I wasn’t sure which would work better– neither were quite in the same style as the other trims, but I thought they’d work out all right.

You can see in the reference images below that there are leafy floral motifs at the center front and sides of the center panel, and smallish motifs at the high points of the swags of trim around the hem.

My Fair Lady Ballgown, Part III: Selecting Overgown Embellishments

When I first started this projects I started bookmarking every applique, trim, rhinestone, or other embellishment that I thought might be useful in recreating the lavishly beaded overgown. There were so many options!

It looks as though there are a few different types of embellishment:

1. Narrow trim down the center front that outlines the central panel. This appears vaguely floral in design and may or may not also be used to outline swags around the hem of the dress. It looks to be about 1/2″ wide.
2. Circular embroidered motifs that are graduated in size– the largest appear to be about 1.5″ in diameter, and it looks as though the largest few sizes are pad-stitched with a bead or rhinestone in the center.
3. Narrow embroidered trim around the very bottom edge of the hem. It appears scalloped on a large scale, but it’s tough to see detail.
4. Filler appliques of some kind to embellish specific points on the gown– for example, the center front of the skirt and the high points of the swags I mentioned earlier.
5. Clear rhinestones, sequins, and beads in various sizes.
6. Baguette beads or sequins sewn in straight, short lines.